User`s guide

Chapter 3. Updating EISA Information
EK–SWRA2–IG. C01 3–3
Figure 3–1 EISA Configuration Utility Main Menu
EISA Configuration Utility
Steps in configuring your computer
STEP 1: Important EISA configuration information
STEP 2: Add or remove boards
STEP 3: View or edit details
STEP 4: Examine required details
STEP 5: Save and exit
Select=ENTER <Cancel=ESC>
5. Choose the Add or remove boards option (Step 2 in this example) and press
the Enter key.
3.2.2 Adding a New Board to the ECU
To add a new board to the ECU, follow these steps:
1. A screen similar to the one shown in Figure 3–2 displays, listing the current
EISA boards in your system. Look at your host system and find the empty
EISA slots.
NOTE
The ECU screen displays only the EISA slots, not
the ISA slots. The display may indicate that a slot
is empty while in fact the board slot actually
contains an ISA board. You must look at the slots.