User`s guide

Chapter 2. Preparing to Install
EK–SWRA2–IG. C01 2–5
2.2.2 Verifying the Controller Kit and Storage Enclosure
The specific components of the controller kit and storage enclosure vary
depending upon whether you purchased a 1- or 3-channel controller and
depending upon for which bus, and operating system you purchased it. The
following Sections 2.2.2.1 and 2.2.2.2 specify the components you will receive
for each subsystem configuration.
2.2.2.1 The Controller Kit
The Storage Works RAID Array 200 Subsystem controller kit includes the
following components:
• One RAID controller, 1- or 3-channel, EISA or PCI
• One RAID Array 200 Standalone Configuration Utility
• RAID Array 200 Online Management Utilities for operating systems
supported on Alpha-based systems, or on Intel-based systems
• The RAID Array 200 Online Management Utility for operating system user’s
guides
• This guide
2.2.2.2 The Storage Enclosure
The number of StorageWorks Storage Enclosures and disk drives that you
received depends upon what you purchased for external storage capacity. See
your storage enclosure's user's guide and packing list for a complete list of the
components that come with the storage enclosure. Check your system
documentation for information on internal storage resources.