User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
1–12 EK–SWRA2–IG. C01
1.3.4 The RAID Array 200 Standalone Configuration Utility
The RAID Array 200 Standalone Configuration Utility is MS-DOS, bootable
software for Intel systems and ARC compliant for AXP systems. Use the
standalone configuration utility to do the following:
• Configure your array (automatically or interactively) by:
• Creating drive groups on which to configure logical RAID drives
• Creating logical RAID drives by selecting RAID level, drive group
and related parameters
• View or change your configuration
• Maintain the array
• Save and restore controller configuration
• The standalone utility also comes with a separate utility for you to use to
update controller BIOS and controller firmware
1.3.5 The RAID Array 200 Online Management Utility for Your
Operating System
The RAID Array 200 Online Management Utility runs with your operating
system and allows you to do the following:
• Monitor the status of the array and receive alerts when the status changes
• Maintain the array
• Check and repair parity