User`s guide

EK–SWRA2–IG.C01 Index–1
Index
A
ARC console, 7–6, 9–6
automatic configuration
selecting this option, 6–21
initializing a logical RAID drive, 6–23
saving the RAID configuration to
diskette, 6–25
B
backing up your system, 2–6
bad block table, 7–56
battery backup 6–6, 6–12, A–3
BIOS
address, 3–11
message, 6–46
updating on an Intel-based system
containing an EISA controller, 9–33
C
cables, 2–6
length, 4–6, 4–7
rearranging, 7–36
cabling
1-channel RAID controller, SCSI, 2–6,
4–6, 4–7, 4–8, 4–10
3-channel RAID controller, internal,
EISA, 2–6, 5–4
3-channel RAID controller, internal,
PCI, 2–6, 5–6
3-channel RAID controller, SCSI, 2–6,
5–7, 5–11, 5–14 to 5–17
caching, 1–8
choosing a cashing policy, 6–42, 7–32
write-back, 1–8, 7–32
write-through, 1–9, 7–32
.CFG, 3–5, 3–6
changing configuration, 7–18
creating a drive group, 7–20
defining a drive group, 7–22
arranging a drive group, 7–25
creating a logical RAID drive, 7–27
choosing a caching policy, 7–32
defining a hot spare drive, 7–33
saving the logical RAID drive
configuration, 7–35
initializing a logical RAID drive, 7–36
saving the RAID configuration to
diskette, 7–39
channel 0, 4–1, 5–1
command tagging, 6–10
configuration
changing, 7–18
clearing, 7–43
hardcopy of, 7–15
planning, 6–17
redundant, 1–1, 6–15, 6–37, 7–27
restoring to a new controller, 7–40
saving to flash EEPROM/NVRAM,
6–27, 6–45, 7–35
saving to diskette, 6–51, 7–39
updating, 7–18
viewing, 7–8