User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
9–32 EK–SWRA2–IG. C01
9.4.2.3 Setting the Startup Parameters
To set the Startup Parameters, follow these steps.
1. Use the arrow keys to highlight the Startup Parameters option on the
Edit/View Parameters menu and press the Enter key. The Start up
Parameters menu appears, with the Spin up option highlighted shown in
Figure 9–23.
Figure 9–23 The Start Up Parameters Menu
2. The Spin up option specifies whether the controller tells the drives when to
spin up or whether the drives spin up on power up. Use the original setting(s)
previously noted.
When you finish setting the Startup Parameters, you have completed setting the
controller parameters. Press Esc to return to the Edit/View Parameters menu.
Press the Esc key again to return to the main menu.