User`s guide

Chapter 9. Upgrading
EK–SWRA2–IG. C01 9–31
2. Enter the channel number of the attached controller and press the Enter key.
The SCSI Transfer Parameters of Channel x screen appears similar to the
one shown in Figure 9–22. The Data transfer rate option appears
highlighted.
Figure 9–22 The SCSI Transfer Parameters for the Specified Channel
3. Press the Enter key to scroll through the Data transfer rate options. Select
the original value previously noted.
4. Use the arrow keys to highlight the Command tagging option. Select the
original setting(s) previously noted.
5. Set the SCSI Transfer Parameters for the specified channel to the original
values previously noted. Press Esc to return to the Edit/View Parameters
menu.
6. Repeat Steps 1–5 until you have set these parameters for each channel on
your controller.