User`s guide

Chapter 9. Upgrading
EK–SWRA2–IG. C01 9–27
9.4.1.2 Invoking the Standalone Utility on AXP Systems
To invoke the Standalone Utility on AXP systems, follow these steps:
1. Invoke the ARC console menu shown in Figure 9–18. Consult your AXP
system documentation to invoke the ARC console.
Figure 9–18 The ARC Console for An AXP System
2. Insert the RAID Array 200 Standalone Configuration Utility for AXP
Systems diskette into your floppy drive.
3. Select the Run a program option from the AXP Boot menu. The system
displays the Program to run: prompt.
4. Type: Program to Run: A:swxcrmgr
The utility checks the drives, and then displays the main menu as shown in
Figure 9–19.
Section 9.4.2 describes how to set controller parameters.
ARC Multiboot DEC Version 2.07
Copyright (c) 1993 Microsoft Corporation
Copyright (c) 1993 Digital Equipment Corporation
Boot Menu
Boot Windows NT
Boot an alternate operating system
Run a program
Supplementary menu ...
Use the arrow keys to select, then press Enter.