User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
9–24 EK–SWRA2–IG. C01
Figure 9–15 The Save and Exit Screen
Step 5: Save and Exit Help=F1
In order to complete the configuration process, you must
save your configuration. In this step, you must select
whether to save your configuration or discard your changes
before exiting this program.
If you choose to save, this program will save the new
configuration in your computer's nonvolatile memory and in
a file on your SYSTEM CONFIGURATION diskette, and then your
computer will be restarted for you.
If you choose to discard the configuration, any changes you
have made will be lost.
If you are finished configuring, remove the SYSTEM
CONFIGURATION diskette if it is in drive A and press ENTER
to restart your computer.
>Save the configuration and restart the computer.
Discard the configuration and return to the main
menu
>Select=Enter< <Cancel=ESC>
7. Press Enter to save the configuration. A screen similar to Figure 9–16
appears.