User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
9–18 EK–SWRA2–IG. C01
4. Select the appropriate .CFG file for your RAID controller as follows and
press the Enter key:
• Select !MLX0077.CFG for a 1-channel controller in an Intel-based computer
running any operating system, or in Alpha running Microsoft Windows NT
for AXP systems
• Select !MLX0075.CFG for a 3-channel controller in an Intel-based computer
running any operating system, or in an Alpha running Microsoft Windows
NT for AXP systems
• Select AMLX0077.CFG for a 1–channel controller in an Alpha running
OpenVMS for AXP systems, or DEC OSF/1
• Select AMLX0075.CFG for a 3–channel controller in an Alpha running
OpenVMS for AXP systems, or DEC OSF/1
The utility displays a screen similar to Figure 9–9.
Figure 9–9 The Add Board Confirmation Screen
Step 2: Add or remove boards
Add confirmation
Board Name:Digital SWXCR-EA (1-ch) EISA RAID Cntlr
(Generic)
Ok=ENTER <Cancel=ESC>
5. Press the Enter key to confirm the .CFG file. The ECU displays an add slot
screen similar to Figure 9–10.