User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
9–16 EK–SWRA2–IG. C01
9.3.3 Adding an Updated Board to the ECU
To add an updated board to the ECU, follow these steps:
1. Use the up and down arrow keys to select a slot in which to install the
controller.
• To install an SWXCR-EA 1-channel controller, you need one
empty EISA slot.
• To install an SWXCR-EB 3-channel controller, you need two
empty EISA slots in close proximity, for cabling purposes,
during the hardware installation. (If your system has additional
punchout slots to accommodate SCSI channels, you need only
one EISA slot).
2. Press the Insert key to add the board. The Add screen appears similar to the
screen shown in Figure 9–7.
Figure 9–7 The Add Board Screen
Step 2: Add or remove boards Help=F1
Add
To add a board to the list, you must locate the diskette
containing the boards configuration (.CFG) file.
• If there is an option configuration diskette included
with your board or option, insert that diskette and press
ENTER.
• CFG files for many popular boards are on the SYSTEM
CONFIGURATION diskette. To look for your .CFG file there,
press ENTER.
• Other .CFG files are contained on the .CFG FILE LIBRARY
diskette. To look for your .CFG file there, insert that
diskette and press ENTER.
>Ok=ENTER< <Cancel=ESC>