User`s guide

Chapter 9. Upgrading
EK–SWRA2–IG. C01 9–13
Figure 9–4 The Add or Remove Board Screen
Step 2: Add or remove boards Help=F1
Listed are the boards and options detected in your
computer.
♦ To add boards or options which could not be detected, or
which you plan to install, press Insert key.
♦ To move the highlighted board to another slot, press the
F7 key.
♦ To remove the highlighted board from the
configuration, press the Del key.
♦ When you have completed this step, press the F10 key.
Slot 1 (Empty)
Slot 2 (Empty)
Slot 3 (Empty)
Slot 4 (Empty)
Slot 5 Digital SWXCR–EA EISA RAID Controller (1-channel)
Slot 6 (Empty)
Add=INSERT <Remove=DEL> <Move=F7> <Done=F10>
2. Write down the slot number of the controller board for future reference.
Failure to get the controller back in the same slot will disturb the
configuration. Use your arrow keys to select the controller and press the
Delete key. The ECU displays a screen similar to Figure 9–5.