User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
9–10 EK–SWRA2–IG. C01
1. Boot from your system ECU configuration diskette, for Intel-based systems.
For AXP-based systems running DEC OSF/1 or OpenVMS for AXP systems,
boot to console prompt and type: runecu. For AXP-based systems running
Microsoft Windows NT for AXP systems choose Run ECU From Floppy
from the ARC menu.
2. Select the function that configures your system and press the Enter key.
3. Follow the instructions for system configuration until a menu similar to
Figure 9–1 displays on your screen.
Figure 9–1 EISA Configuration Utility Main Menu
EISA Configuration Utility
Steps in configuring your computer
STEP 1: Important EISA configuration information
STEP 2: Add or remove boards
STEP 3: View or edit details
STEP 4: Examine required details
STEP 5: Save and exit
Select=ENTER <Cancel=ESC>
4. Choose the View or edit details option (Step 3: in the example screen shown
in Figure 9–1) and press the Enter key. Scroll through the file that now
appears on your screen until you find the slot number referencing the
controller you are updating. The information for a 1-channel board appears
similar to Figure 9–2.