User`s guide

Chapter 8. Troubleshooting and Service Information
EK–SWRA2-IG. C01 8–29
14. Press S to save the displayed configuration and Esc to quit.
15. Press the reset button on your system or power the system off and then turn
it back on to reboot.
16. Invoke the utilities as described in Chapter 5. Make sure that the system
configuration matches the previous configuration.
17. Use the View/Update option on the main menu to verify the status of your
drives.
18. Rebuild any failed drives.
19. Use the Parity Check option on the main menu to check the consistency of
the logical RAID drive(s).
If you cannot recover, you need to reconfigure the array and restore your data
from backup media.