User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
8–28 EK–SWRA2–IG. C01
Figure 8–5 Locating EEPROM U33 on 1-Channel or 3-Channel Controller
10. Power on the system. The system displays the following message:
Mismatch between NVRAM and flash EEPROM
configuration.
Spinning up drives...
11. Invoke the utilities as described in Chapter 5. The utilities display the fol-
lowing message:
The NVRAM and flash EEPROM configurations do not
match. Proceeding further will allow selection be-
tween NVRAM and Flash configurations.
Press any key to continue.
12. Press a key. The utilities display the Load Configuration menu.
13. Select the Load Flash configuration option and press the Enter key. The
utilities display all optimal and hot spare drives connected to the system.