User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
7–40 EK–SWRA2–IG. C01
7.3.7 Restoring RAID Configuration onto a New Controller
In the event that your RAID controller fails, you will need to restore the
configuration information onto the new RAID controller. You can restore the
RAID configuration information if you saved a copy of the configuration onto a
diskette.
To restore the configuration, follow these steps:
1. Insert the diskette with the previously saved configuration into the
appropriate floppy drive.
2. Use the arrow keys to highlight the Tools option from the main menu and
press the Enter key to select it.
3. Use the arrow keys to highlight the Backup/Restore option from the main
menu and press the Enter key to select it. The Backup/Restore menu appears
with the Restore Configuration option highlighted, as shown in Figure 7–22.
The utility prompts you to use caution.
Figure 7–22 Backup/Restore Conf Menu