User`s guide

Chapter 7. Maintaining the Array with the Standalone Configuration Utility
EK–SWRA2–IG. C01 7–35
7.3.4 Saving the Logical RAID Drive Configuration
To save the logical RAID drive configuration that you created, follow these
steps:
1. Press the ESC key from the Update/View Configuration menu or from the
Define Spare screen. The utility displays a confirmation window, as shown
in Figure 7–19
Figure 7–19 Configuration Confirmation Screen
2. Select Yes to save the logical RAID drive configuration. The utility saves
the configuration to the flash EEPROM/NVRAM and the main menu
appears.
The configuration utility remembers the configuration that you created by storing
it on flash EEPROM/NVRAM. Thereafter, your computer and the utility expect
to see this configuration. See Section 7.1.1 for more information on how your
system interacts with the stored configuration.
If you created a new logical RAID drive, go to Section 7.3.5 to initialize it.