User`s guide

Chapter 7. Maintaining the Array with the Standalone Configuration Utility
EK–SWRA2–IG. C01 7–25
NOTE
If you select a drive for the drive group by mistake
or you want to redefine a drive group, highlight the
Cancel Group option and press the Enter key. The
cursor appears on the first drive in a group on the
matrix. Move the cursor to the drive group you
want to cancel and press the Enter key.
Check the drive groups that you defined to make
sure you want these drive groups. Make any
changes to the drive groups now. You can not
cancel a group once you select the Arrange Group
option.
7.3.1.2 Arranging a Drive Group
Arrange drive groups to specify the order in which you want to use them. The
configuration utility allows you to create logical RAID drives on only one drive
group at a time. You must use all of the disk space available on a drive group
before you can begin creating logical RAID drives on the next group.
To arrange the drive groups in the order in which you want to use them, follow
these steps,
1. If the Arrange Group option does not already appear highlighted, use the
arrow keys to highlight it and press the Enter key. The cursor moves to the
first defined drive group.
NOTE
If you press the ESC key while arranging groups,
you lose the unassigned drive groups and must
recreate them.
2. Use the arrow keys to move the cursor to a drive in the group you want to
arrange. Press the Enter key. The drive group and size information for the
arranged drive group appears in the table at the lower-right side of the
screen, as shown in Figure 7–13. If you defined only one drive group, the
View/Update Configuration menu appears with the Define Logical Drive
option highlighted.