User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
7–24 EK–SWRA2–IG. C01
Figure 7–12 Adding a New Drive Group
5. Press the Esc key after you add all the drives that you want for this drive
group.
6. Repeat Steps 3 through 6 of this procedure to create additional drive groups.
If you plan to define a hot spare, leave at least one drive with RDY (ready)
status. This drive must be of equal or greater capacity to the drives you used
in drive groups.
If you assign all the physical drives to drive groups, the utility automatically
highlights the Arrange Group option. Otherwise, press the Esc key and the
cursor returns to the Group Definition menu. Go to Section 7.3.1.2,
Arranging a Drive Group.