User`s guide

Chapter 7. Maintaining the Array with the Standalone Configuration Utility
EK–SWRA2–IG. C01 7–23
Figure 7–11 The Define Drive Group
3. Press the Enter key to select the Create Group option. The cursor moves to
the drive matrix.
4. Position the cursor on each drive you want to add to the drive group, one at a
time, and press the Enter key. The utility adds that drive to the drive group
by changing its status from RDY (ready) to OPT (optimal); and assigning a
group letter and a sequence number to the drive, as shown in Figure 7–12.