User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
7–16 EK–SWRA2–IG. C01
4. Select Yes and press the Enter key if you want to create a file with the name
that you specified. If a file with the same name already exists, the utility will
write over it. Select No and press the Enter key to return to the previous
menu without creating a file. When you select Yes, the following prompt
appears: Saved configuration print file. Press any key
to continue
5. Press any key and the Tools menu appears. Press the Esc key to return to the
main menu.
6. Press the Esc key again, and the utility prompts you to confirm that you want
to exit the utilities.
7. Select Yes to exit the utility. An MS-DOS prompt appears.
8. At the MS-DOS prompt Type: print filename, where filename is the
name you specified for the print configuration file, including path, if any.
For example, type: print c:\config.sav). A file similar to the following prints
on the printer attached to your computer.