User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
7–14 EK–SWRA2–IG. C01
The View Matrix list displays all of the logical RAID drives configured onto
the disk drives in your subsystem.
3. Use the up and down arrow keys to highlight a logical RAID drive and press
the Enter key. The cursor moves to the drive matrix. It appears at disk drive
0 of the drive group associated with the selected logical RAID drive. The
drive matrix displays:
• Target ID
• Channel number
• Drive group designator, if any, which allows you to see which disks
belong to which drive groups, and how many disk belong to the group,
based on the numbers assigned to the drives, 0–7. For example drive B-2
is one of three drives in drive group B
• Status for each drive in the subsystem (Table 7–1 describes each status
that a drive can have)
4. Press the Enter key to return to the View Matrix list.
5. Press the Esc key to return to the View/Update Configuration menu when
you finish viewing drive groups associated with logical RAID drives.