User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
7–12 EK–SWRA2–IG. C01
3. Use the up and down arrow keys to highlight the Device Information option
on the Group Definition menu and press the Enter key. The cursor appears in
the drive matrix.
4. Use the up and down arrow keys to move to the drive for which you want
information and press the Enter key. The Device Information box replaces
the Drive Group table, as shown in Figure 7–7.
Figure 7–7 Device Information
5. The Device Information box displays information about the drive including
its manufacturer, model number, firmware version, capacity, and its channel
number and target ID.
6. Press the Esc key when you finish viewing information from the Device
Information box, and the Drive Group table appears.
7. Press the Esc key again to return to the View/Update Configuration menu.