User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
xvi EK–SWRA2–IG.C01
Organization
This guide contains the following:
Chapter 1: Overview of RAID and the RAID Array 200
Overview of RAID and the RAID Array 200 discusses the definition of RAID,
the different levels, key concepts, and also describes StorageWorks RAID Array
200 Subsystems.
Chapter 2: Preparing to Install
Preparing to Install defines the user-supplied hardware and software
requirements, and provides preliminary procedures required prior to installing the
subsystem including inventorying the components of a StorageWorks RAID
Array 200 Subsystem. Chapter 2 also contains a tabular guide for installing the
subsystem for the first time.
Chapter 3: Updating EISA Information
This chapter describes how to run the EISA Configuration Utility (ECU), and
update your EISA information appropriately for the addition of your EISA-based
RAID Array 200 Subsystem.
Chapter 4: 1-Channel RAID Controller Installation
1-channel RAID Controller Installation describes how to prepare a 1-channel,
EISA or PCI controller for installation into your system, and how to install it.
This chapter also describes how to attach the cable to connect the controller to an
external storage enclosure, and how to connect the power cable to an external
storage enclosure.
Chapter 5: 3-Channel RAID Controller Installation
3-channel RAID Controller Installation describes how to prepare a 3-channel,
EISA or PCI controller for installation into your system, and how to install it.
This chapter also describes how to attach the cable to connect the controller to an
external storage enclosure, and how to attach the power cable to an external
storage enclosure.