User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility

7–6 EK–SWRA2–IG. C01

7–3 The ARC Console for an AXP System

To invoke the standalone configuration utility, follow these steps:

1. Insert the Standalone utility for AXP Systems diskette into your floppy

drive.

2. Use the arrow keys to move to the Run a Program option, and then press the

Enter key to select it. The AXP boot menu displays the program to

run: prompt.

3. Type the following to run the utility from the A: drive:

Program to Run: A:swxcrmgr

After checking the drives, the utility displays the main menu as shown in Figure

7–2.

7.1.2.2 Navigating Through the Utility

Aside from invoking the utility, the Standalone utility operates the same in both

the Intel and AXP system environments.

Once started, the utility displays the main menu options. Use the up and down

arrow keys or type the highlighted letter (usually the first letter of the item) to

move the cursor from one option to the next. A message window at the bottom of

the screen displays a brief description of the highlighted option.

NOTE

You can use the Enter key or the Return key

interchangeably.

ARC Multiboot DEC Version 2.07

Boot Menu

Boot Windows NT

Boot an alternate operating system

Run a program

Supplementary menu ...

Use the arrow keys to select, then press Enter.