User`s guide

Chapter 6. Configuring Your Array
EK–SWRA2–IG. C01 6–45
6.6.4 Saving the Logical RAID Drive Configuration
To save the logical RAID drive configuration that you created, follow these
steps:
1. Press the Esc key from the New Configuration menu or from the Define
Spare screen. The utility displays a confirmation window, as shown in
Figure 6–24.
Figure 6–24 Configuration Confirmation
2. Use the up and down arrow keys to highlight Yes and press the Enter key to
save the logical RAID drive configuration. The utility saves the
configuration to the flash EEPROM/NVRAM and the main menu appears.
The controller stores the configuration that you created on flash
EEPROM/NVRAM. Thereafter, the controller expects to see this configuration.