User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
6–44 EK–SWRA2–IG. C01
2. Use the arrow keys to select the drive with a status of RDY you want to
define as a spare and press the Enter key. The utility changes the drive status
to HSP (hot spare), as show in Figure 6–23.
If you select the wrong drive or decide that you do not want a hot spare
drive, press the Enter key again. The status of the drive returns to its
previous status.
Figure 6–23 The Status of the Selected Drive Changes to HSP
Now go on to Section 6.6.4 to save the configuration of your array.