User`s guide

Chapter 6. Configuring Your Array
EK–SWRA2–IG. C01 6–41
Figure 6–21 The New Logical RAID Drive Appears in List at Bottom Left
6. Repeat Steps 1–5 for up to eight logical RAID drives, or until you use all the
capacity of all the available drive groups, whichever comes first. You can
only create logical RAID drives on one drive group at a time and must use
all of the space on a drive group before you can go on to the next one. The
utility displays each logical RAID drive in the table on the lower-left of the
screen.
Now see Section 6.6.2.2 to select a caching policy for the logical RAID drives
that you created.
Or if you do not want to use the logical RAID drives that you just created, press
Esc. The New Configuration Menu appears. Press Esc again. The Save
Configuration screen appears. Highlight No and press the Enter key. The Main
menu appears.