User`s guide

Chapter 6. Configuring Your Array
EK–SWRA2–IG. C01 6–39
Figure 6–19 Select RAID Level
3. Use the up and down arrow keys to move to the RAID level for the logical
RAID drive and press the Enter key to select. The amount of space available
on the first drive group in the Grp/Drvs table displays in a pop-up window.
4. Type the amount of space that you want to use for this logical RAID drive,
and press the Enter key, or press the Enter key to select all available space.
The utility displays the logical drive number, the RAID level and size of this
logical RAID drive in the status block, as shown in Figure 6–20.
NOTE
If you create non-redundant logical RAID drives
and redundant logical RAID drives on a drive
group, only the portion of the drive group used by
the redundant logical RAID drive is redundant.