User`s guide

Chapter 6. Configuring Your Array
EK–SWRA2–IG. C01 6–33
6. Press the Esc key after you add all the drives that you want for this drive
group.
7. Repeat Steps 3 through 6 of this procedure to create additional drive groups.
If you plan to define a hot spare, leave at least one drive with RDY status.
This drive must be of equal or greater capacity to the drives you assigned to
drive groups.
If you assign all the physical drives to drive groups, the system
automatically highlights the Arrange Group option. Otherwise, press the Esc
key and the cursor returns to the Group Definition menu. Go to Section
6.6.1.2, Arranging a Drive Group.
NOTE
If you select a drive for the drive group by mistake
or you want to redefine a drive group, highlight the
Cancel Group option and press the Enter key. The
cursor appears on the first drive in a group on the
matrix. Move the cursor to the drive group you
want to cancel and press the Enter key. You can
only delete drive groups in the reverse order in
which you arranged them.