User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
xii EX-SWRA2-IG. C01
Figures (Cont.)
9-15 The Save and Exit Screen ......................................................................................9-24
9-16 The Reboot After Changing the ECU Screen .........................................................9-25
9-17 The Main Menu of the Standalone Utility..............................................................9-26
9-18 The ARC Console for An AXP System..................................................................9-27
9-19 The Edit/View Parameters Menu ...........................................................................9-28
9-20 The Physical Parameters Screen ............................................................................9-29
9-21 Enter Channel Box Appears at Bottom Right.........................................................9-30
9-22 The SCSI Transfer Parameters for the Specified Channel ......................................9-31
9-23 The Start Up Parameters Menu..............................................................................9-32
A-1 Installing Cache Memory Module on PCI RAID Controller....................................A-2
A-2 Cache Memory Module Installed on PCI RAID Controller .....................................A-2
A-3 Location of Battery Backup Board Connector Cover...............................................A-3
A-4 Removing Battery Backup Board Connector Cover.................................................A-4
A-5 Installing Battery Backup Board on PCI RAID Controller ......................................A-5
A-6 Battery Backup Board Installed on PCI RAID Controller........................................A-6
Tables
2-1 Roadmap for Installing Your RAID Array 200 Subsystem for the First Time...........2-2
2-2 Required Cables for EISA Controllers .....................................................................2-6
2-3 Required Cables for PCI Controller .........................................................................2-6
5-1 SCSI Bus Termination Jumpers...............................................................................5-2
6-1 Data Availability Configuration Through RAID 5..................................................6-18
6-2 Drive Connectivity and Performance Through RAID 0..........................................6-19
6-3 Number of Drives You Can Use In a Drive Group for Each RAID Level ...............6-29
6-4 How the Capacity of Each Individual Drive Affects the Capacity of the
Drive Group – – Example Only .............................................................................6-29
7-1 Drive Status...........................................................................................................7-11
7-2 Number of Drives You Can Use in a Drive Group for Each RAID Level ...............7-21
8-1 Pedestal and Single Power Supply (PS) Status LEDs ...............................................8-3
8-2 Pedestal and Dual Power Supply (PS) Status LEDs..................................................8-3
8-3 Disk Drive SBB Status LEDs...................................................................................8-5
8-4 Troubleshooting Techniques....................................................................................8-7
8-5 Error Messages......................................................................................................8-13