User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
6–26 EK–SWRA2–IG. C01
4. Press any key to Continue. The Backup/Restore Conf menu appears.
5. Select Backup from the Backup/Restore Conf menu. The utility prompts you
to enter a name for the file.
6. Enter the path (for example, a:) and an appropriate file name with up to eight
characters and a three character file extension (for example, a:newconf.sav)
and press the Enter key. The utility displays a message asking whether it
should overwrite an existing file.
7. Press the Y key to save the new file. A message appears indicating that the
utility is saving the configuration. The Backup/Restore menu then appears
when the utility finishes saving the configuration.
Or,
Press the N key to return to the Backup/Restore menu without saving the
file.
8 Press the Esc key to exit. The main menu appears.
9. Press Esc twice, then highlight Yes and press the Enter key to exit the utility.
10. Reboot your computer and start your operating system.
Go to the RAID Array 200 Online Management Utility User’s Guide for your
operating system for information on how to load the online management utility
onto your system. The online management utility provides you with automatic
notification of a change in status of the subsystem. Loading the online
management utility onto your system completes the installation of your RAID
Array 200 Series subsystem.