User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
6–24 EK–SWRA2–IG. C01
Figure 6–12 Initialize Logical Drive Screen
3. Press the Enter key. A confirmation window appears displaying the
following message:
Do you want to proceed with initialization?
4. Select Yes. An Initialize Logical Drive status bar appears at top of screen
indicating amount of initialization completed. The bar gradually fills as the
initialization process completes. When done initializing, the utility prompts
you to press any key to continue.
5. Press any key. The utility displays a message indicating that it is saving the
configuration, then the main menu appears.
Go to Section 6.5.3 to continue with the next step of the installation, saving the
RAID configuration to a diskette.