User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
6–22 EK–SWRA2–IG. C01
4. Press the Enter key to select No. This sets the cache policy to Write Through
(the recommended policy, see Section 6.6.2.2 Choosing a Caching Policy for
a description of the cache options). The utility displays a window with
Automatic Configuration at the top of the screen and the message, Saving
configuration, please wait ..., at the bottom of the screen. The utility then
displays a screen with your system configuration information, similar to the
one shown in Figure 6–11.
5. Press any key to return to the main menu.
Now go to Section 6.5.2 to initialize the logical RAID drive.
Figure 6–11 The Automatic Configuration Screen