User`s guide

StorageWorks RAID Array 200 Controller Installation and Standalone Configuration Utility
6–14 EK–SWRA2–IG. C01
Figure 6–10 The Hardware Parameters Screen
3. The Battery Backup option appears highlighted. Press the Enter key to
change the setting if necessary.
4. Use the arrow keys to highlight the StorageWorks Fault Management option,
and press the Enter key to change the setting, if necessary.
5. Press the Esc key to exit when you finish setting these options. The
Edit/View Parameters menu appears.
6. Press the Esc key again to return to the main menu.
7. If you changed an option, the utility prompts you to save altered controller
configuration. Select Yes to save the current status. The main menu appears.
NOTE
Any change to these options becomes effective
the next time you reboot the system.