Specifications

52 Software Interface
OP
This field contains the operation code that identifies the command as the
STATUS command. The code for the STATUS command is 4.
Status
This field contains status information about the execution of the
command. The module writes values into this field that indicate whether
or not the command executed successfully.
3.5.3.2 Status Message
Figure 3-10 shows the format of the STATUS message.
MA-0564-88
Figure 3–10 Status Message Format
MSGTAG
The message tag informs the driving software which messages belong
with which commands. DECvoice does not interpret the message tag. The
message tag is only significant to the driving software.
Slot
This field contains the slot code that identifies the module subsystem that
generates the message. The slot code for the status message is 0.