Specifications

18 Installation
5. To check how SYSGEN has configured the system, type
CTRL Z
at
the DEVICE> prompt. Then exit SYSGEN.
DEVICE>
CTRL Z
Device: UDA Name: PUA CSR: 772150 Vector: 154 Support: yes
Device: TU81 Name: PTA CSR: 774500 Vector: 260 Support: yes
Device: QNA Name: XQA CSR: 774440 Vector: 120 Support: yes
Device: DTC04 Name: VXA CSR: 761142* Vector: 300* Support: no
Device: DTC04 Name: VXB CSR: 761144* Vector: 310* Support: no
Device: DTC04 Name: VXC CSR: 761146* Vector: 320* Support: no
Device: DTC04 Name: VXD CSR: 761150* Vector: 330* Support: no
1.3.2.2 Setting the switches for a system configuration
This example show how to configure a system with an RQDX3, TK50,
DEQNA, two DHV11 modules, and two DTC04 modules.
$ MCR SYSGEN
SYSGEN> configure
DEVICE> rqdx3
%SYSGEN-I-EQV_NOTICE, equivalent name - device RQDX3 will be output as UDA
DEVICE> deqna
%SYSGEN-I-EQV_NOTICE, equivalent name - device DEQNA will be output as QNA
DEVICE> tk50
%SYSGEN-I-EQV_NOTICE, equivalent name - device TK50 will be output as TU81
DEVICE> dhv11,2
DEVICE> dtc04,2
DEVICE>
CTRL Z
Device: UDA Name: PUA CSR: 772150 Vector: 154 Support: yes
Device: TU81 Name: PTA CSR: 774500 Vector: 260 Support: yes
Device: QNA Name: XQA CSR: 774440 Vector: 120 Support: yes
Device: DHV11 Name: TXA CSR: 760440* Vector: 300* Support: yes
Device: DHV11 Name: TXB CSR: 760460* Vector: 310* Support: yes
Device: DTC04 Name: VXA CSR: 761242* Vector: 320* Support: no
Device: DTC04 Name: VXB CSR: 761244* Vector: 330* Support: no
SYSGEN>
CTRL Z
Example 1–1 Configuring a System with Two DECvoice Modules
NOTE
See the tables in section 1.2 to find the correct switchpack settings
for CSRs and Vectors.