Specifications

Protocol Messages
Page
84
SOFTWARE ID (C-17) : =
The identification of the software the system is supposed
to be running. The format is the same as defined for the
Boot message.
SOFTWARE ID RELATED (1-16)
: =
Information specific tothe particular SOFTWARE ID. Not
present
if not applicable. Interpretation is specific to
the receiving system (e.g., file specification, which may
vary depending on the type of
file server).
SYSTEM PROCESSOR (1)
: B =
The type of system processor. Values are in Appendix A.
SYSTEM PROCESSOR RELATED (1-16)
: =
Information
specific to the particular SYSTEM PROCESSOR.
Not present
if not applicable. Values are in Appendix A.
DATA LINK
(1) : B =
The type of data link protocol on the channel being
used.
Values are in Appendix A.
DATA LINK BUFFER SIZE
(2)
: B =
The size of the data link buffer. Not present if
applicable. The default value is 262.
DATA LINK RELATED (1-16)
: =
Information specific to the particular DATA LINK.
present
if not applicable. Values are in Appendix A.
5.3.4 Request Counters
The Request Counters message consists of:
CODE RECEIPT
NUMBER
Where:
CODE
(1)
: B =
The number 9.
RECEIPT NUMBER (2) : B =
A receipt number to identify the request.
not
Not