Specifications

Protocol Messages
Page
83
4 Boot
5 Console carrier
6 Data link counters
7 Console carrier reservation
CONSOLE USER (6)
: B =
System address of the system that has the console
reserved. Not present if not applicable. Must be present
if console carrier is available,
i.e., FUNCTION bit
5 is
ON. Not valid if the console carrier is not reserved,
i.e., FUNCTION bit
7 is ON.
RESERVATION TIMER
(2) : B =
The maximum value, in seconds, of the timer used to clear
unused console reservations. Not present
if not
applicable. Must be present if console carrier is
available,
i.e., FUNCTION bit
5 is ON.
CONSOLE COMMAND SIZE
(2) : B =
The maximum size of the console command buffer. Not
present if not applicable. Must be present
if console
carrier is available, i.e., FUNCTION bit
5 is ON.
CONSOLE RESPONSE SIZE
(2) : B =
The maximum size of the console response buffer. Not
present if not applicable. Must be present if console
carrier is available, i.e., FUNCTION bit
5 is ON.
HARDWARE ADDRESS
(6) : B =
A hardware established address for this system, relative
to the channel being used.
SYSTEM TIME
(10) : B =
A segmented binary system time stamp. The format is the
same as defined for the Parameter Load with Transfer
Address message.
COMMUNICATION DEVICE
(1) : B =
The hardware device type of the channel being used.
Values are in Appendix A.
COMMUNICATION DEVICE RELATED (1-16)
: =
Information specific to the particular COMMUNICATION
DEVICE. Not present
if not applicable. Values are in
Appendix
A.