Specifications

Protocol Messages Page 77
NOTE
The maximum lengths of the above parameters are
longer than for MOP version 2.1. Old system
versions may not be able to support more than
6
bytes for a system name or 2 bytes for a system
address. The following parameter
did not exist in
MOP version 2.1.
HOST SYSTEM TIME (10)
: B =
Segmented binary system time of host, consisting of:
CENTURY YEAR MONTH DAY HOUR MINUTE SECOND 100TH TDFH TDFM
where:
CENTURY
(1) : B = the century base for reckoning the
absolute year. Value is a positive integer (0 through
+127).
YEAR (1) : B = the year of the base century. Value is in
the range
0 through 100.
MONTH (1)
: B = the month of the year, starting with
January
= 1. Value is in the range 1 through 12.
DAY (1)
: B = the day of the month. Value is in the
range
1 through 31.
HOUR (1) : B = the hour of the day. Value is in the
range
0 through 23.
MINUTE (1) : B = the minute of the hour. Value is in the
range
0 through 59.
SECOND (1) : B = the second of the minute. Value is in
the range 0 through 59.
100TH (1) : B = the number of hundredths of a second.
Value is in the range 0 through
99.
TDFH (1) : B = the hours portion of the Time Differential
Factor. Value is in the range -12 through +13.
TDFM
(1) : B = the minutes portion of the Time
Differential Factor. Value
is in the range -59
through 59. The sign of this value must be the same
as the sign of the TDFH value.
TRANSFER ADDRESS
(4) : B =
As described for the Memory Load with Transfer Address message.