Specifications

Interfaces
Page
45
Outputs: None.
3.3 Network Management Interface
This section defines the control and observation functions for the
maintenance operations.
The Network Management Interface functions are:
. Set-state -- enable or disable local maintenance function.
. Read-state -- read states of switchable functions.
. Add-dump/load-entry -- add a new entry to the Dump/Load Data
Base.
. Remove-dump/load-entry -- Remove an entry from the Dump/Load
Data Base.
. Set-dump/load-parameter -- set a dump/load parameter.
. Read-dump/load-list -- read the list of dump/load entries.
. Read-dump/load-parameter -- read dump/load parameters.
. Set-console-parameter -- set a local console parameter.
. Read-console-parameter -- read a local console parameter.
Function:
Enables or disables various local maintenance operation
or components.
Inputs:
Channel-id
- the unique identification of the channel
the function state is to
be switched.
Function
- the function whose state is to be switched.
functions
for which
One of:
Console Server
- controls whether the Console Server will
respond to any incoming requests.
Dump/Load Server
- controls whether the Durnp/Load Server will
respond
to any incoming requests.