Specifications

Interfaces
Page
20
as normally completed.
Inputs:
Port-id
- a port
identification assigned by the Open function.
Output-buffer
- a descriptor of a buffer for a pending receive.
outputs:
Return-code
- the status of the request. One of:
Success
- the request is now complete.
Unrecognized port
- there is no open port with
the specified
identification.
Unrecognized buffer
- the specified buffer is not queued for
the specified port.
3.2 User Level Maintenance Operation Interface
This section describes the functions available to the maintenance
operation user. The descriptions relate each function to its
respective component in the maintenance operation model. The
functions are divided into three
grouos:
Dump/Load Functions
. Loop Test Functions
. Remote Console Functions
The Dump/Load Functions are:
. Force-load -- load a remote system.
. Force-load-poll -- check for completion of a Force-load.
. Load-self -- load the local system.
. Load-self-poll -- check for completion of a Load-self.
. Force-dump -- dump a remote system.
. Force-dump-poll -- check for completion of a Force-dump.
. Dump-self -- dump the local system.