User guide

Features
Release
20 Strata CS Digital Telephone 02/06
Release
³ When you are in “Handsfree Answer” mode, press Release (programmed
feature button) to release the call and return the line to an idle state. You hear a
short burst of dial tone to indicate that the line has been cleared. The DKT display
returns to idle.
³ When terminating a call, press
Release to drop the current call and receive dial
tone. A new station or outside number may now be dialed.
³ When returning a call in voice mail, press
Release to drop the current call and
return to the voice mail position that you left, without logging in again.
Retrieve Held Call
³ To retrieve a call on hold, press the extension button that has the call on hold. The
display changes back to the connected state.
Held calls can also be picked up at any Secondary Extension number of the same
Primary Extension number that is on hold.
Send Caller to Voice Mail
1. While on a call, send the caller to the voice mail of any other user by pressing
Send to Voice Mail (SVM) (programmed feature button).
2. Enter the mailbox number of the user and the message “sent to voice mail” plays.
The caller is connected to the user’s voice mailbox.
3. Hang up. The phone returns to idle.