Technical data

Server Software and Utilities
2-20
To run the diagnostics from the DOS partition, perform the following:
1. At the MS-DOS prompt, type:
C:\diag\diagnose.bat
2. After the server boots, choose MS-DOS from the boot selection.
3. Once the diagnostics begin, the main screen appears.
To create the diagnostic diskettes from the Quick Launch CD-ROM, perform the
following:
1. Insert the Quick Launch CD-ROM into the drive and boot the server; or from
a PC or workstation, use Windows File Manager or Explorer and run:
<cd-rom>:\QLAUNCH.EXE.
2. From the Quick Launch main menu, select
Installations &
Utilities
.
3. Select the
Utilities
tab and then select the server model.
4. Insert a blank MS-DOS formatted diskette into drive A and select
Diagnostics
.
5. Select
Continue
. Afterwards, remove the diskette for safekeeping.
6. Choose the next diagnostic diskette from the list and then select
Continue
.
Create all the diskettes labeled “
Diagnostics
.”
Refer to Chapter 11, “Troubleshooting,” for more information on using the
diagnostics software.