Technical data

BIOS Setup Utility Features
C-13
Security Options
Menu Fields Settings Comments
Set supervisor
password
Press
[Enter]
. Allows a supervisor password to be set.
The supervisor password must be set if a user
password is to be used.
NOTE:
Entering Setup with a supervisor password
provides full access to all BIOS Setup utility menus.
Set user password Press
[Enter]
. Allows a user password to be set.
This password can be set only if a supervisor password
is entered.
When the user has entered his or her name but the
supervisor is not logged in, only the folllowing
information is accessible:
Supervisor password in
Enabled
.
User password in
Enabled
.
Set user password press [enter] to enter a user
password.
Password on boot
Enabled/Disabled
(which ever is
in effect). This option is not allowed to change.
Password on boot Enabled
Disabled
(1)
Enables or disables the enter password on boot option.
If you enable this option, a user or supervisor password
must be entered in order for the boot process to
complete. If a user or supervisor password is not
entered, the operating system cannot be accessed.
(1)
Factory default
continued