Technical data

BIOS Setup Utility Features
C-10
Menu Fields Settings Comments
If
Enabled
is selected, the
information at the right will
appear.
Base I/O address:
378
(1)
278
3BC
Interrupt:
IRQ5
IRQ7
(1)
Parallel port mode Sets the onboard parallel port mode for the
Enable
and
Auto
settings.
Choose a mode that the parallel port device (such
as a printer) supports. Check the parallel port
device documentation for this information. If this
information cannot be located, use the default
setting.
Output only
Standard printer connection.
Bi-directional
(1)
PS/2 compatible mode to transmit and to receive at
the same time.
EPP
Enhanced parallel port mode.
ECP
Extended capabilities port mode.
Floppy disk controller
Enabled
(1)
Disabled
Auto
Enables, disables, or auto detects the onboard
diskette controller.
If
Enabled
is selected, the
information at the right will
appear.
Base I/O address
Primary
(1)
Secondary
Base I/O address
Primary
(1)
Secondary
Sets the base I/O address for the diskette drive
controller
(1)
Factory default
continued