Technical data

Troubleshooting
11-20
Flash BIOS Troubleshooting
Problem Possible Cause Action
Cannot flash the server’s
BIOS
Main logic board switch
settings incorrectly set.
Make sure main logic board switch
SW1-2 “Recovery Mode” is set to
Recovery and SW1-1 “BIOS
Protection” is set to Off. Refer to
Appendix A for switch locations.
BIOS Setup utility switch
setting incorrectly set.
Make sure the “System BIOS
Flash” option in the BIOS Setup
utility is set to Enabled. Refer to
Chapter 2 for more information.