Technical data

Installing Disk and Tape Drives
7-8
Installing Optional Drives
Your server has three drive bay areas. Optional drives such as SCSI disk drives,
CD-ROM drives, and tape drives can be installed in these drive bay areas. The three
drive bay areas are:
•
Left-front access drive bay area—This area has one 5¼-inch IDE CD-ROM drive
and one diskette drive (standard on the DIGITAL Server 5220 Series).
•
Top-right front access drive bay area—This area has room for two 5¼-inch half-
height SCSI/IDE devices or one full-height, 5¼-inch device.
•
Lower-right front access drive bay area—This area has room for seven
3½-inch wide Ultra SCSI hot-swap drives.