Technical data

Server Software and Utilities
2-6
Changing The Server’s Configuration
The following sections provide detailed information on changing the server’s factory
configuration.
Changing Time and Date
To change the time and date:
1. Reboot the server.
2. Press <F2> when the DIGITAL logo screen appears.
3. In the Main menu, using the cursor keys and [Tab], select (highlight) the
System Time or System Date field to change.
4. Use [+] or [-] to change the field to the desired value.
You can also enter the desired date and time by typing the required
numbers.
5. Press [Esc] then [Enter] twice to exit the BIOS Setup utility and to reboot the
server so changes immediately take effect.