Technical data

Upgrade Procedure

7-3

DIGITAL Server 5220

6. Move or install disk drives. The DIGITAL Server 5220 has an integrated

Symbios SCSI controller.

CAUTION:

For the various operating systems, refer to the

instructions that follow. Also before installing the operating

system, check for O/S specific instructions in the README

files on the Quick Launch CD-ROM, or the system may hang.

SCO UNIX Open Server, Banyan VINES, and SCO UNIXWARE

Ensure that there is a good backup of your original system.

Perform a fresh O/S install on the new system and restore data

from the backup tape.

Windows NT

: Before moving disk drives to the new system, load

the Symbios SCSI driver on the hard drive. Move the drives and

boot the new system. Once operational, disable the Adaptec driver.

Novell NetWare 4.11

: Move the drives and boot the new system to

DOS. Run Install and load the Symbios SCSI driver. Remove the

Adaptec driver and restart the system.

IBM OS/2 Warp

: Operating System versions are not supported

across these platforms, so a tape backup of the old system is

required. Install the new O/S on the new system and restore from

tape the needed data.