Manualshelf

Technical data

ManualsBrandsDigital Equipment Corporation ManualsComputer equipmentDigital Server 3220R Series
121122123124125126127128129130
FRU Replacement
5-30
Processor Module Switch Settings
The following table lists the switch settings of various processor speeds and does not
indicate processor availability. The switches are set correctly for the processor that
came with the server. You only need to change the processor switch settings, that is
SW1, should you upgrade to another processor. Figure 5-15 shows the switch
locations.
CAUTION:
Do not touch any electronic component unless you
are safely grounded. Wear a grounded wrist strap or touch an
exposed metal part of the server chassis. A static discharge from
the fingers can result in permanent damage to electronic
components.
Processor Speed SW1-1 SW1-2 SW1-3 SW1-4
350 MHz OFF OFF ON ON
400 MHz ON ON OFF ON
450 MHz OFF ON OFF ON
ON = switch down; OFF = switch up